Bathrooms are among the smallest and most expensive rooms in the house to repair. A well-done bathroom remodeling project may increase a home’s value and create a wonderful area that is full of design and light. To assist you with remodeling your bathroom, we at New York City Bathroom Remodel have created a comprehensive step-by-step guide.

Bathroom design

The first aspect of your bathroom remodeling that has to be done well is the bathroom design. It might not be enough to just remodel the current bathroom with the same style. The secret to outstanding bathroom design is to keep the users in mind while creating the space. Make sure, though, that the design of your bathroom also considers usage in general. For instance, you might still have easy access to the shower and bath if you were constructing a bathroom for a family. As a result, the design would be suitable for those with limited mobility. This implies that your design will appeal to a larger market if you decide to sell your house or if you are upgrading for financial gain. In addition to making good use of the available space, great bathroom designs also consider drainage alternatives, fitting size, and access to light or windows. Create a layout that reduces the room’s dimensions to scale. Mark the current water entry points first, then the drainage points. Make a list of the bathroom fixtures you need and want, along with their measurements. Now combine the two and see what works. It should be noted that moving the majority of bathroom drainage and water entry locations would incur additional costs.

Bathroom renovation

It’s time to hire a skip bin and remove the old bathroom if you’ve opted to do all or part of the task yourself. If your property was built before 1980, there may be asbestos-containing fibro bathroom wall linings, thus extreme caution must be used. You will require some disposable full-body overalls, eye protection, and a good dust mask. To learn more about the rules governing the removal of bathroom asbestos wall lining, contact your local building authority or municipality.

Everything save the plumbing should be removed. You won’t need to switch off the water for the entire house if you leave the bathroom plumbing in place. The floor tiles and the foundation of sand and cement must also be removed using a jackhammer.

Construction and renovation of bathrooms

Bathrooms must be built correctly from the ground up in order for the final product to be accurate and true. This also guarantees a high-quality finish for the bathroom’s design and appearance.

The Process of Bathroom Renovation

Install electrical lines, drainage pipes, and water pipes.

Install the ceiling and wall lining before installing the bath and bath hob.

The floor, shower nook, and bath recess are waterproof.

Sand and cement are used to level the floor in preparation for tiling.

Tile the floor and the walls, then grout them.

Install new electricity as well as a new bathroom vanity, fixtures, and taps.

final cleaning and ceiling painting.

Electrical and plumbing

At this time, brand-new plumbing has been installed for drainage, clean hot and cold water. The new plumbing must be positioned carefully to ensure that the plumbing fittings are in place when the tiling is complete. The thickness of the wall board, tile adhesive, and tile, for instance, must all be considered when centering a fitting in a shower recess to ensure that it will remain in place once the tiles are in place. Similar considerations must be made when constructing drainage pipes for toilets so that the pipe is in the proper location when the toilet is fitted after tiling. These considerations include the wall lining and tile thickness. Additionally, install any new electrical lines roughly without first connecting them to a power source.

Install wall and ceiling linings in step two.

Install the 6mm wall lining, being cautious to avoid nailing into the new pipes and electrical cables. Nail the fibro board every 150mm. The best method is to measure as you go and outline the pipe and wire arrangement with a pencil on your new wall board. Plasterboard is the most typical ceiling lining, so screw it up (or nail it). Installing the cornice, however, is best done after tiling if you are placing your tiles from floor to ceiling. Install the cornice after the wallboard and ceiling liner have been put in place if you are not tiling the ceiling. Additionally, you may now construct the frame and install the bath if it is not freestanding. Make sure the bath is installed properly, taking into account the adhesive and tile thickness. Before moving further with your bathroom remodeling, be sure to inspect all linings and pipes.

The third step is to waterproof the bathroom.

Your bathroom’s floor, shower nook, and bath area should all be waterproof. Make sure the waterproofing extends 100mm up the walls while waterproofing the floor. 100mm above the shower rise outlet, the shower recess needs to be waterproofed. Additionally, the bath must be waterproofed 100mm above the bath’s rim on all sides and down to the bottom. Install a watertight 25 x 25 mm metal angle into the lip at the entryway, cemented into place with high-quality silicone. Your whole bathroom should now be tanked, ensuring that all water only drains into the sewer. Bathroom waterproofing advice: Waterproofing is a simple task, but precision and quality are crucial.

Lay the floor’s cement screw in step four.

The floor must be somewhat flat, smooth, and have a modest fall toward the drainage exit before the floor tiles may be installed. Sand and cement must be used to do this, and it is recommended to also incorporate a waterproofing agent. Set the floor level at the entryway with a level. Measure down the thickness of the tile plus 10mm for the adhesive, using the top aluminum angle as the completed floor level. With a level, draw a line all the way around the bathroom. Then, screed your sand and cement mixture, allowing for a 1 to 3-degree fall to the top of the drain outlet. Take your time, and make the final level as seamless as you can. Rub the sand cement mixture with a house brick once it has set but is not completely dry (you can walk on it, but it is still a little mushy). By doing this, you will eliminate all the little highs and lows and check your level along the way. The bathroom floor will be ready to tile after it has completely dried. The more effort you put into the floor screed, the simpler it will be to tile.

Tile the walls and floors

Prior to grouting, place your tiles on the floor. After that, place your wall tiles while making sure they are level. After the bathroom tiles have been cut and installed, grout each one before wiping them clean.

Installing plumbing fixtures and fittings is step six.

Install all of your faucets and plumbing fixtures. Additionally, all of your soap and towel racks should fit. Install your new bathroom vanity, ensuring it is level, and use silicone to seal the top and the bath as well. Before drilling into your tiles, a tip is to make sure they are in the proper location.

Painting and cleaning up are the final two steps.

Make sure everything is properly installed and that your piping is leak-free before painting your ceiling and doing a final clean. – Enjoy your brand-new bathroom.